One of the most essential items you have to have in your toolbox is the Lineman’s pliers. This type of pliers are especially designed to twist, grip, cut, and bend wires and cable. If you’re constantly doing repairs around the house, or are a big fan of home improvement, then I recommend buying the best lineman’s pliers there is for your toolbox.
If you're a handyman and LOVE home renovations, then you might have a lot of supplies or equipment you can't keep at home! It's pretty annoying having no space for your hobby, which is why it may be time to start building a shed-- so here's a quick tutorial on how to anchor a shed!
Are you still a beginner and have no idea what to do when it comes to DIY projects? Not to worry, as it's easy to do once you have the proper tools and instructions! For those who want to know how to anchor a shed, we give you an extensive guide on what you need and what to do.
Before anchoring your shed, you will need to prepare certain supplies and materials. You can find any of these materials at home or in your local hardware store:
There are different ways to anchor a shed. Many construction brands offer anchor kits with the proper materials needed to secure the shed.
On the other hand, you can also create your own anchor with the materials stated above. It takes a few days for you to anchor a shed, and you may need help. Here are the seven steps to follow so you can successfully anchor your shed:
Measure the place where you plan to anchor your shed. The area to mark depends on how big your shed is. After you have measured the area, mark the places where you will dig post holes and stake the support to. You can also mark it through digging shallow holes before using your post hole digger.
Using your post hole digger, dig a hole about 14 inches deep on the marks you have made. I would recommend you to check the ground before using the post hole digger.
It's best to place the anchor on moist soil to make digging easier. Remove excess soil that goes to the side as you dig, so it won't go back into the hole.
With your 4x4 beam, mark every 20 inches and cut the marked areas with the Miter saw. Be careful when using your Miter saw, make sure that you are equipped with the safety googles and gloves to prevent injury.
If you have no Miter saw, you can use other saws or equipments to cut the wood evenly.
Place the posts into the holes, filling it with concrete for proper support. Because there is a variety of concrete available, the instructions on how to pour it may be different. Some will need to be mixed beforehand, while others are poured straight from the packaging then with water.
If you will need to mix it, make sure you add the proper amount of water and let it sit for a while, or what's recommended by the manufacturer. You can refer to the instructions of the concrete mix you bought.
Once the holes are filled with concrete, let it sit overnight for it to properly secure.
You'll need help for making the floor boards. Using the 2x4 boards, add it to the frame and mark it every 14 inches. Secure the boards to the frame with a hammer and framing nails. Nail every 14 inches you marked. These boards will help support the frame and keep it leveled.
Use lag bolts to secure the frame to the posts. To do this, use clamps to hold the frame to drill properly. Drill a pilot hole with a smaller diameter than the screw you will use. After that, drill the hole, drilling all the way. Add the screw and fasten it properly.
With the power drill, drill two holes in all your posts and the boards. Add lag bolts to the holes and tighten it with a socket wrench. Make sure that they are drilled properly so they won't overlap.
Once that's done, use nails or screws to put the frame and platform. You can use lag screws again, making sure that everything is properly secure and supported evenly.
And you're done anchoring the shed! You can now enjoy a secured shed with proper flooring and support.
Your shed is important for you to keep certain supplies and materials that can't be placed at home. With that being said, will need the proper materials and protection for it to stand properly. It will help keep your items safe and dry from any weather condition. That's why it's recommended to anchor your shed to a foundation.
Hopefully, this article on how to anchor a shed will have helped you become more knowledgeable and have you building it in no time, whether you're a beginner or handyman.
So what are you waiting for? If your shed needs to be anchored, then prepare the materials and begin the work today! You can also find many more home improvement projects and materials from the blog.
We hope you enjoyed the article. If you have any more comments or suggesting, then do comment down below. We would love to hear what you have to think. Thanks for reading!
When we talk about the subject of how to paint a room, it’s more than just grabbing a brush and smearing a certain color of paint on your walls. In fact, it’s much more complicated than that; but in a good way! This article will show you just how much freedom and choices you have when painting a room, plus all the information you need in order to do it.
The folding saw is another invention by modern man that makes our tasks a heck of a lot easier, just like a corded drill. If you don’t have one already in your garage’s tool kit, now’s the time to buy this handy tool. In this article, I’ll be giving you my selection of best folding saws, as well as help you choose which one is the most suitable one for yourself.
Are you thinking of doing another home improvement project, but this time, it involves concrete? Then, you’ve come to the right place; because in this article, I’m going to tell you how much does concrete weigh.
Plus, I’m going to take another step further and tell you how much it will cost, so as to help you with your estimation needs.